3d-printable terrain for all your samurai wargaming needs
| << Necrontyr Objectives available NOW!! 2018-07-02 | Necrontyr jungle board pics >> 2018-07-23 |
It's been a few weeks since the last release, so you'll be happy to hear that the last of the BIG prints has now been completed, and will be ready for release very soon..... the Necrontyr Tombcity Walls Set!
£ This pile of printed pieces will become two straight sections and one enormous gatehouse!
£ Here you can see the straight piece on the left differs slightly from the piece on the right - the back wall has a large gap in it! The piece is designed to work with the Pathways and Bridges Set, so that steps and bridges can be joined on to the tombcity walls. More photos of that soon....
£ The piece above the large gates simply slides down onto the door hinges, and hold the doors in place. They can then be opened and closed during games.
£ Finally, the two obelisks are added on top. They both have steps inside, allowing your Necrons to walk up from the lower walls to the battlements above the gate.
£ A view from the side. Chunky, aren't they?!
| << Necrontyr Objectives available NOW!! 2018-07-02 | Necrontyr jungle board pics >> 2018-07-23 |
Blog
