3d-printable terrain for all your samurai wargaming needs
Samurai Wooden Walls Set
An authentically-modelled set of wooden walls from old Japan. These walls would have surrounded residential houses of samurai, and lesser houses in both rural and town settings, when the more solid stone walls were not required.
The fence part is 30mm tall (approximately head height on most models), with the wooden roof stretching up to 53mm. Walls can be used with or without the textured bases, and include holes for 5mm x 1mm magnets hidden under the roof, and can be used in conjunction with the Samurai Stone Walls set. Straight and corner sections are included in the set.
The gateway section (also 120mm wide) is approximately 76mm tall, and features detailed hinges and studs to the front and supports to the rear. Small locking brackets are featured on the rear, and the lock beam can actually be removed. The gate hinges are designed to accept 1.75mm PLA filament (or similar diameter pins etc) in guide holes, and actually open and close (see video below) during play if required.
Two top sections for the gateway are included; sloping wooden roof and solid horizontal beam.
Fence sections are all supplied in two versions; with nails (or wooden pegs) and without nails.
Each straight section measures 120mm, and all sections include holes for 5mm x 1mm magnets.
This downloadable ZIP file contains the following STL files :
* Samurai models not included.
Related blog articles:
This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.
PDF Instructions >
Beautiful items. Great detail.
- by neigebarb
Blog
