3d-printable terrain for all your samurai wargaming needs
| << Printing the ruined castle wall 2021-03-31 | Samurai Ruined Castle Wall available NOW! >> 2021-04-04 |
Following on from this week's reveal of the upcoming Ruined Castle Wall section, today we have another damaged terrain piece to announce - the Ruined Stone Wall!
£ This was the inspiration for the ruined wall section, which I photographed a while back on one of my little wanderings through old Japanese villages. The construction is quite interesting - a rough frame of bamboo is held together with twine (you can see this poking out of the damaged parts), and then the wall's core is built up with rocks and dried mud. Finally, the outer facing is plastered on, and this is the part that tends to fall off first, due to age, bumps or earthquakes.
So the goal was to incorporate some of those details into this new ruined section, to give your tables some extra realism. Here's how it looks....
£ This ruined section comes in 4 parts, and simply replaces an undamaged 120mm section of stone wall from the existing set.
£ If you look closely you should be able to make out the bamboo and twine frame inside the damaged wall, and there are also some tiles from the roof scattered in the broken rocks and rubble at the base.
£ Here's a look at how the 4 parts separate. The upper walls have holes for magnets in the ends, and also holes in the bottom to fit onto the stone bases.
They can all be printed without supports, and I printed these at 0.1mm layers since they are pretty small and fast to make.
£ If you want, you can also use the upper walls without the stone bases, for lower height walls.
These ruined stone walls are currently on the paint desk along with the ruined castle walls, and will be released very shortly. Watch this space!
| << Printing the ruined castle wall 2021-03-31 | Samurai Ruined Castle Wall available NOW! >> 2021-04-04 |
Blog
